Panasonic OMNIVISION PV-8453 - Manual (Page 16)

Record On a Tape
•Important: It the remote control POWER, ACTION, PROG, CHA/V, INDEX or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
iN^Check list before you begin.
□ All connections are made.
(See pages 6-9.)
□ VCR is plugged in.
□ TV is turned on and set to the VCR
channel (CH 3 or 4).
Multi Function
Display
1
Insert a cassette
with record tab
• VCR power comes on automatically.
Press CH A/T* or NUMBERED
keys
to select a channel.
• Or, press CHANNEL kfW on the VCR.
• Holding down CH A/T will increase
the channel search speed.
• To record from an outside source,
press CH A/T or INPUT to select
“LINE" {see page 17).
Press SPEED
to change the
recording speed.
• SP = Standard Play ,
LP = Long Play
SLP = Super Long Play
(See page 5.)
Press REC/TIME
on the remote control or VCR to
start recording.
• To edit out unwanted portions, press PAUSE to pause the
recording in progress.
To release, press PAUSE again.
(After the VCR has been in Pause mode for 5 minutes, it will
stop automatically to protect the tape and video head.)
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, press REC7TIME repeatedly to set the length of the
recording. Each press will change the stop time as shown.
( ►Normal Rec
A:
*0:30-►1:00
D
4:00-^3:00-4—2:00-4-1:30
“TIMER" lights in the Multi Function Display.
The remaining recording time can be displayed by pressing
DISPLAY in OTR mode.
5
Press STOP
to stop recording.
• Or, press STOP/EJECT on the VCR.
16