One time vcr setup, Turn tv and vcr on, Turn tv and vcr on.* tune tv to vcr output channel – Panasonic OMNIVISION PV-8453 User Manual
Page 12: W press ch, Press ch, Press vcr/tv, Press action, Press, And then press, Press action twice
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
One Time VCR Setup
'Important: If the remote control POWER, ACTION, PROG, CHA/V, INDEX or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
When the VCR is turned on for the first time, it automatically enters the setup mode.
Setup includes the following:
• Choose the language for on-screen menus and messages.
• Tell the VCR how your equipment Is hookup (pages 6-9) so the VCR can correctly place channels Into memory.
• Get the VCR ready for dock set.
6
7
3
4
Using
AT*^ ►
keys
When a menu screen is displayed, ^ vS-P) ^
the PLAY, STOP, REWIND, and FF
buttons on the remote control function ^
as ► only. Use the buttons on the VCR
for play, stop, rewind, and fast forward functions.
When a program screen is displayed, the REC,
FF, RE\W, and PLAY buttons on the remote control
and the VCR function as AT-^^ only. (See Timer
Recording Using VCR Buttons on page 19.)
To Set the Language, Channels
and Clock
1
Turn TV and VCR on.*
Tune TV to VCR output channel
(the same one you set
on the back of the VCR: CH3 or CH4).
SELECT mmi
PUSH VCR CH
A:
ENGLISH
OPRIMIR VCR CH TrESPANOL
APP. VCH/TV : FRANÇAIS
w Press CH
A
for English
on-screen displays.
Or,
press CH
T
for Spanish
on-screen displays.
Or,
press VCR/TV
for French
on-screen displays.
• You can also set the language using the buttons on the VCR.
• If wrong language is set, see the “Reset all VCR Memory
Functions” section on page 5.
• The VCR should be connected to an antenna or cable box (page 6-9).
4
Press CH
A
to start
Channel
Auto Set.
• “PLEASE SET CLOCK BY PUSHING ACTION KEY" appears.
Press ACTION
to display the
SET CLOCK screen.
Press
AT
to select the MONTH,
and then press
► to enter.
■ Make each entry within 5 minutes,
or the VCR exits the Set Clock screen.
-My— SET CLOCK
SELECT
SET
END
A
▼ KEY
► KEY
ACTION KEY
7
Press
AT
and
to select
and set remaining items at right.
• Pressing ◄ will move back to an item
for correction.
Remaining Items
to be set;
• Date * Year
• Time
• DST, (Daylight Saving
Time see page 5.)
8
Press ACTION twice
to start
the clock and exit this mode.
1/ 4/2000 TUE 12:00PM
SET ► KEY
start
:
action
key
12