Panasonic S-PG340 - Manual (Page 17)

To cancel the edit mode
Press ■ STOP after recording has finished.
To enter desired recording time other
than 46,60 or 90 minutes
STOP
Press TAPE LENGTH to select “C--------” then keep
pressing SKIP () to enter the tape’s total
playing time in minutes.
How to prepare the cassette deck for
recording TAPE LENGTH
1. Insert the cassette tape into the cassette holder of the deck for
the synchro-edit-recording. (Be sure the tape is rewound.)
2. Select the noise-reduction system and the reverse mode
( CtD).
3. Check to be sure that the fonward-side indicator (►) of the deck
to be used is illuminated.
4. Set the cassette deck to the recording standby mode.
(Refer to operating instructions for the cassette deck to be used.)
If the cassette deck has no SYNCHRO
EDIT terminal
o
SKIP SKIP
For example:
When the total recording time of the tape to be used is 52 minutes,
keep pressing SKIP until the display shows “C- Sc*".
Press the play button of the cassette deck at the
same time as pressing ^ PLAY on the CD player
to start recording.
•When the deck has reverse mode, set to one-way ( ).
•When the recording for side A is finished, the CD player will go to
the pause mode. The cassette deck will keep recording.
•To record on side B, first press the stop button on the cassette
deck, then start recording again on side B while at the same time
pressing ► PLAY on the CD player,
17