Panasonic S-PG340 - Manual (Page 10)

Program Play
You can program up to 20 tracks in any order you desire.
Before beginning, follow steps 1-3 of ''Basic Op­
erating Procedure” on page 7.
1
In the stop mode, press PROGRAM.
If you press this button in the play mode, the track in play will
be programmed.
Illuminates
The last track in programmed order
P&M n
n
u u
No.
2 3 4 5 6 7 8 9 1 0 1 1 1 2
2
Press SKIP ) to select the track
number.
For example: To select the 3rd track, press ^ SKIP
3 times.
3
Press PROGRAM.
4
Repeat steps 2 and 3 until the desired prog­
ram is completed.
For example, if you enter tracks 5,3 and 2:
Number o
Programm
Tc
ed tracks pr
ital playing time of
ogrammed tracks
P G M L p :
L. N o .
1 1 1 4 ]
13-
[ 6 7 8 9
V7
10 11 12
If you enter a wrong number by mistake, press CLEAR,
•When the 21st program has been performed, the following
display Indicates that no more tracks can be added.
•If the total playing time exceeds 99 minutes 59 seconds or if
the track number 21 or higher has been specified, the display
reads as follows:
i» / i.
Press P* PLAY to start.
•The unit stops automatically when all the programmed tracks
have finished playing.
• Even after play is completed, the program sequence will
remain in the unit’s memory. You can play the sequence
again by pressing ^ PLAY,
10