Panasonic S-PG340 - Manual (Page 11)

To switch to sequential mode during
play _____
Press PROGRAM.
PROGRAM
This clears all programmed contents from memory.
To cancel the program play mode
Press ■ STOP.
STOP
Press once in the stop mode and twice during play.
This clears all programmed contents from memory.
Turning off the power will also cancel the program play mode.
To confirm the program
Press RECALL.
RECALL
Each time you press RECALL, the display shows programmed
track number and its sequence, so that you can verify the entire
program.
For example:
The diagram shows a program consisting of tracks S, 3,2.
Programmed track number Programmed sequence
V
Press RECALL,
Press RECALL
again.
5 '■
o
Press RECALL
again.
1 i 3 4 B g 7 8 « « H 1 1
__ J
p 3
L. No.
1 3 3 4 S 6 7 S B 1 0 1 1 1 1
The normal display will resume in about 4 seconds.
To enter additional tracks
In the stop mode, press SKIP ^ ) to
specify the track number and then press PRO­
GRAM.
(See page 10.)
To clear the entry
To clear the last track In the sequence, press
CLEAR in the stop mode.
CLEAR
To cancel a track in the middle of the sequence,
press RECALL repeatedly until the display
shows the track number to be cancelled, then
press CLEAR.
RECALL CLEAR
] ❖ □
To cancel all the programmed tracks, press
PROGRAM twice In the stop mode and return to
step 2 on the previous page.
PROGRAM
11