Panasonic S-PG340 - Manual (Page 15)

Time fade function
The time fade function allows the unit to finish the play with fade-
out.
You can specify the time (from 5 sec. to 99 min. 59 sec,) when the
fade-out of 5 seconds is finished.
1
Press TIME FADE in the pause or stop mode.
The “—:—” indication will be shown on the display panel.
2
Press SKIP (K^, and TIME FADE to
enter the desired time.
For example: If you want the fade-out to be finished 30 min­
utes later, follow the procedure described as
below.
1) Keep pressing SKIP until the display shows “ 3Ü
Pressing SKIP starts the countdown from 99.
2) Press TIME FADE to enter “30”.
3) Press ►>! SKIP to specify“ GO
Pressing SKIP starts the countdown from 59.
4) Press TIME FADE to enter “00”.
The time fade indicator on the display panel illuminates.
Time fade indicator
If you want to change the time while entering, press CLEAR to
cancel it.
3
Press ► PLAY.
The fade-out begins 5 seconds before the specified time.
The time fade indicator flashes on and off.
After the fade-out is finished, the unit goes into the pause
mode. The time fade indicator goes out.
■ To see the remaining time
Press TIME MODE three times In the play mode.
(See page 14.)
TIME MODE
Remaining time
- г s ■
\ ' / _ _ _ _ _ _
1 T5A0E 1
- 1 - B 3 4 5 6 7 8 9
---------------------------± __________ ZLSl
1 0 1 1 1 3
■ To cancel time fade function
Press ■ STOP.
STOP
15