General description, Received by the system, Received by the finai destination – Panasonic PANAFAX UF-550 User Manual
Page 93: Received by the final destination, Omr transmission
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OMR Transmission
General Description
This feature is designed to work with a store and forward system (i.e. UF-M500 Multi-Channel Fax Gateway)
that utilize OMR (Optical Mark Recognition) sheet to obtain routing information to automatically relay the fax
messages to its final destination.
When sending a document with the OMR-XMT feature set to ”On”, the process of the following 2 operations
will be changed
•
Automatic Page Re-transmission
When the OMR-XMT feature is set to "On” and the memory transmission failure occurs, the automatic
re-transmission will start from the 1st page including the OMR sheet rather than from the failed page.
•
Automatic Page Numbering
When the OMR-XMT is set to "On”, the automatic page numbering on the header of each page will start
from the 2nd page instead of the 1 st page, which is your OMR sheet.
Table 1: Documents sent with the OMR-XMT feature set to "On”
Transmitted Pages
Received by the System
Received by the finai
destination
Header P.02
Header P.01
_ _ ^
Page 2
Pagel
—
Table 2: Documents sent with the OMR-XMT feature set to "Off”
Transmitted Pages
Received by the System
Received by the final
destination
Header P.03
Header P.02
Header P.01
OMR
sheet
Page 1
Page 2
Header P.03
Header P.02
Pagel
Page 2
91