Setting for deferred transmission, To set a program key for deferred transmission, Program keys – Panasonic PANAFAX UF-550 User Manual
Page 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
► Program Keys
Your fax machine has special Program Keys. These keys are useful if you frequently need to send or poll the
same group of stations. You can use these keys to store a sequence of stations to be polled, a deferred
transmission or polling sequence, an additional One-Touch key or a One-Touch group key.
Setting for Deferred Transmission
To set a Program Key for deferred transmission
5
FUNCTION
SET
Ex:
PI
1
2
3
Enter the starting time using 4 digits.
Ex: d)(3)(3)® (11:30 p.m.) and I SET
Enter the station numbers by using One-Touch Key, or
I ABBR I and a 2-digit code.
Ex:
You may use the E or 0 keys to review the entered
station(s) before going to next step. If you find an error,
press iCLEAR
I
to erase the displayed station.
PROGRAM[P ]
PRESS PROGRAM KEY
PROGRAM [ Pi ]
NO. = I
1:PROG 2;ONE-TOUCH
PROGRAM[PI]
START TIME
1 =
ENTER STATION(S)
THEN PRESS START
<01> {Station name)
5551234
6
PROGRAM[PI]
I
NAME
7
Enter the station name (up to 15 character) using the
Character keys (see page 10).
Ex: PROG.A and
1
SET
You can now set other Program Keys by repeating the
procedures from Step 2, or return to standby by pressing
I STOP I.
PROGRAM[P ]
PRESS PROGRAM KEY
70