Control panel – Panasonic PANAFAX UF-550 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Control Panel
^
1
—
CONTRAST
Used to set Normal, Lighter, or Darker, (see
resolution
Used to set Standard, Fine, Super-Fine.
1 T ]
page 41) Also serves as an arrow key (<) to i----------- 1
(see page 41) Also serves as an arrow key
<
move the cursor over recorded numbers and ^
(>) to move the cursor over recorded
characters.
numbers and characters.
HALFTONE
Provides OFF, QUALITY or FAST settings
stamp
Used to turn the verification stamp ON or
l 1
for halftone documents, (see page 42) --------------------1
OFF. (see page 42)
V
Also used for the following ^
Also used for the following
• Search station name for Directory
• Search station name for Directory
Search Dialling
Search Dialling
• Confirm entered station for multi-station
• Confirm entered station for multi-station
communication.
communication.
1 ....................
• Select functions.
• Select functions.
—
MEMORY
»-------- 1
Used to select either memory or direct
communication.
(see page 44 to 54)
FUNCTION
1 Z 1
Used to start or select the function and
sub-functions. These functions are
explained in detail on the next page.
Л
DIRECTORY
SEARCH
СГ' r,l
Used to search for a station name
(see page 49 and 54)
Ч
___________
PAUSE/
REDIAL
SPACE
ABBR
SUB-ADDR
FLASH
Used to enter a pause when recording or
dialling a telephone number, or to redial the
last dialed number, (see page 59)
Used to start Abbreviated Dialling.
(see page 48 and 53)
Used to access some features of your PBX.
---------VOL
CLEAR
VOL— +
SET
MONITOR
Used to erase the previously entered input.
Also used to adjust the monitor and ringer
volume, (see page 24)
Used to set operations. Also used to adjust
the monitor and ringer volume.
(see page 24)
Used to start On-Hook Dialling or to make
voice contact request.
(see page 56)
Used for Manual Number Dialling,
recording phone numbers, and selecting
functions.
Used to temporarily change Dialling Mode
to Tone when Pulse mode Is set.
Used to confirm current communication
modes (e.g. Page number, ID, Dialed
Telephone number. File number) when unit
is ON LINE.
Used to cancel operations. When it is
pressed, the machine wilt return to standby.
Used to make copies.
(see page 64)
Used to start operations.
11