Manual number dialling (direct transmission), Manuai number diaiiing (direct transmission), Sending documents – Panasonic PANAFAX UF-550 User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Documents
Direct Transmission
If your machine’s memory is full or you wish to send the document real time, use Direct Transmission.
Manual Number Dialling (Direct Transmission)
To dial the telephone number manually, follow the steps below.
1
Set document(s) face down.
ENTER STATION{S}
THEN PRESS START 00%
2
MEMORY
¿3
Make sure that the lamp goes off.
ENTER STATION
00
%
3
Enter a telephone number from the keypad.
Ex:
(D(D(D©(D(|)0
PRESS START TO DIAL
55512341
4
m
Your machine starts to dial the telephone number.
* DIALLING
5551234
Note: 1. If you need a special access number to get an outside line, dial it first then press
I PAUSE I
to enter a
pause (represented by a before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press
I TONE I
(represented by a T).
The dialling mode will be changed from Pulse to Tone after dialling the digit
T.
Ex: 9 PAUSE TONE 5551234
3. To stop the transmission, press
I STOP I.
The display shows:
COMMUNICATION STOP ?
1;YES 2:NO
Press
(?) to stop the transmission. The Communication Journal will not print out regardless of the
printout mode setting of the Communication Journal.
51