Manual number dialling, Sending documents, D(d©(i)@0 – Panasonic PANAFAX UF-550 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
► Sending Documents
Manual Number Dialling
To dial the telephone number manually, follow the steps below.
1
I_______ Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
M
emory
l—T J
Make sure that the MEMORY lamp is on.
If not, press MEMORY to set ”On”.
3
Enter a telephone number from the keypad.
Ex:
®(D(D©(I)@0
TEL. NO.
55512341
The document is stored into memory with a file number.
Then starts to dial the telephone number.
STORE *
N0.002
PAGES=01 05%
* STORE * COMPLETED
TOTAL PAGES=05 25%
* DIALLING * N0.002
5551234
HI
Note: 1, If you need a special access number to get an outside line, dial it first then press
I PAUSE I to enter a
pause (represented by a
”-'7
before dialling the full number.
Ex: 9 PAUSE 5S51234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press
I
TONE 1 /represented bv a T).
The dialling mode will be changed from Pulse to Tone after dialling the digit T.
Ex: 9 PAUSE TONE 5551234
46