Panasonic OMNIVISION PV-DM2799 - Manual (Page 54)

Before Requesting Service
Check the flowing points once again if you are having trouble with your unit.
Power Correction
No power... • Completely insert Power Plug into an AC outlet.
• Set POWER button to ON.
Power turns itself off... • Auto power-off (shut off) occurs after about 5 minutes elapse In DVD mode or
if there is no broadcast signal in TV or Playback mode. Turn the power back
on. (P.18, 32)
Monitor Correction
No picture or sound... • Make sure your antenna system (TV or CABLE), is correctly set. (P. 9)
• Completely insert Power Plug into an AC outlet.
• Set POWER button to ON.
• Select “INT on SP switch. (P.10)
Poor picture with normal sound... • Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in the SET UP
TV menu, (P.50)
Poor sound with normal picture... • Adjust VOLUME control. (P.14)
Poor TV reception... • Adjust SHARPNESS and PICTURE controls in the SET UP TV menu. (P.50)
No color or poor color... • Adjust TINT and COLOR controls in the SET UP TV menu. (P.50)
Ghost (multiple) images... • Install a directional antenna.
TV programs cannot be watched... • Make sure the selected channel is in unit's memory. (P.13)
Channel cannot be selected... • Only the channel begin recorded can be viewed on this unit.
VCR Correction
TV program cannot be recorded... • Make sure your antenna system (TV or CABLE), is correctly set. (P. 9)
• Make sure cassette record tab is intact. (P. 6)
Timer recording, cannot be
performed...
• Check that clock is set to current time and date.
• Make sure DSS/CABLE box (if used) is left on and tuned to channel to be
recorded.
• Set recording Start/Stop time correctly. (P.20-21)
• Timer recording may not be performed or continued if a power interruption of
more than 1 minute occurs before or during a Timer Recording, after power
is restored.
No playback picture, or the playback
picture is noisy or contains streaks... • Adjust TRACKING control in either direction. (P.16)
• Try Head Cleaning, (P.8)
VCR cannot be controlled... • Make sure VCR LOCK is set to off. (P.33)
DVDA/ideo CD/CD Correction
Play fails to start even when PLAY
is pressed...
Play starts but then stops
immediately... • This unit cannot play discs other than DVDs, Video CDs and CDs.
• The disc may be dirty and require cleaning,
• Be sure disc is installed with label side up.
Picture is distorted during rapid
advance or rapid reverse...
• The picture will be somewhat distorted at times: this is normal.
No rapid advance (or rapid reverse)
play... • Some discs may have sections which prohibit rapid advance (or rapid
reverse).
Play does not start even when title
is selected... • Confirm the “DVD LOCK" setting, (P,49)
Audio soundtrack and/or subtitle
language is not the one selected at
the initial settings...
• If the audio soundtrack and/or subtitle language selected at DVD initial
settings does not exist on the disc, it will not be accessible.
No subtitles... • Subtitles appear only when available on disc.
• “OFF" is selected at the changing subtitle language. Select “ON” to display
the subtitles. (P.46)
Alternative audio soundtrack
(or subtitle) language cannot be
selected...
• Alternative language cannot be selected with discs which do not contain
more than one language.
• For some discs, alternative language cannot be selected with the AUDIO or
SUB TITLE button. Try selecting it from the DVD menu if available.
Angle cannot be changed... • This function is dependent on software availability. Even if disc has multiple
angles, they may be recorded for specific scenes only (ANGLE indicator on
unit lights up). (P.47)
54
For assistance, call 1-800-211-PANA(7262)