Panasonic OMNIVISION PV-DM2799 - Manual (Page 15)

MTS Broadcast/TV Stereo System
Receivable Broadcast Types
The following are possible broadcast types with their accompanying on*
screen displays. The signal being received is indicated with an
^ mark while the selected audio mode is indicated with an arrow. To
change the audio mode for these broadcasts, follow the “Select Audio
Mode for TV Viewing" section (below.)
Display the broadcast signal
being received.
Press DISPLAY.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
{main language) and Secondary Audio
Program (sub language) broadcasts are
both being received simultaneously.
Select the STEREO or SAP audio mode.
MTS stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the display
flickers, select MONO audio mode for
possibly better results.
SAP broadcast
Secondary Audio Program (sub language.)
Select SAP audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast.
Select Audio Mode for TV Viewing
Press AUDIO to select the desired
audio mode as described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio
mode as shown below.
• “SAP" is selected with first press of AUDIO.
< Example >
Equipped with dbAfV Noise Reduction
for true MTS reproduction,
dbx* -TV Noise Reduction is required for
good stereo separation and audio fidelity,
dbx* is a registered trademark, and is
licensed by dbx* Technology Licensing.
15