Panasonic CQ-VX999EW - Manual (Page 42)

Tone Quality Adjustment/HEQ Setting
0 SEL, # A, V, > # SPC, 0 preset 1,
0 preset 2 button
1. HEQ Switching
Press SEL to switch tone quality as follows.
Normal Mode ^ HEQ ^ GEQ
h - BAL//FAD
T i
Preoui DRCn ^ SBC/SBC-SW Position
2. Selecting Desired Tone Quality
Select a desired tone quality using A, V j
>-
With the center fixed fiat, any of the 49 equali­
zer patterns, arranged in-vertical and horizontal
directions, can be selected.
GEQ Memory
0 SEL, 0 operation buttons, 0 SPACE, #
preset 1,0 prese 2, 0 preset 3, 0 preset 4,
0 preset 5, ® preset 6
T' Select GEQ.
1 Select a desired equalizer characteristic.
3) Press and hold one of the mennory buttons
for more than 2 seconds.
The preset number blinks, indicating that the
selected equalizer characteristic has been saved
in the memory.
GEQ Setting
0SEL,0 A, V,<, >
® Press SEL to select GEQ mode.
® Press <, > (frequency up/down) to select a
frequency.
© Press A to raise the level.
Press V to lower the level.
GEQ Memory Recall
0 SEL, 0 operation buttons , 0 SPACE, 0
preset 1, 0 prese 2, 0 preset 3, 0 preset 4,
0 preset 5, 0 preset 6
® Press SEL to select GEQ.
@ Press one of the memory buttons.
TUNER (RADIO
Selecting Tuner Mode
0 AM/FM button
if the mode is other than tuner mode, press this
button to change to tuner mode.
Switching Bands
0 AM/FM button
Press this button to switch the AM and FM band
alternately.
J
Tuning (Manual)
0 ATUNE,0TUNEV
Press A to raise the frequency.
Press V to lower the frequency.
Preset Memory
® AM/FM, # ATUNE, 0TUNEV! ^ Preset 1,0 preset
2, # preset 3,0 preset 4, @ preset 5,0 preset 6
© Press AM/FM to select the AM or FM band as
desired.
© Press A or V to tune in to a desired station.
© Press and hold one of the preset buttons 1 to
6 for more than 2 seconds until the display
blinks. It indicates that the station has been
preset in the memory.
Automatic Seek
0 ATUNE, 0TUNEV
Press and hold A or V for more than 0.5
second, then release. The radio automatically
stops on the next station.
A
Preset Tuning
© preset 1, 0 prese 2, 0 preset 3, 0 preset
4, 0 preset 5, 0 preset 6
Press one of the buttons 1 to 6 preset in the
memory , and the corresponding preset station is
tuned in.
Auto Preset Memory
0 AM/FM, 0 ATUNE, 0TUNEV> 0 preset 1,0 preset
2,0 preset 3,0 preset 4, @ preset 5,0 preset 6
@ Press and hold AM/FM (AUTO PRESET) for
more than 2 seconds, and frequency search
begins with the lowest of the frequencies on
the band being received, and up to 6 stations
are automatically stored in the preset memory
in the order of signal intensity.
® After search, the preset stations are received
for 5 seconds each in sequence.
® When you find a station you wish to listen to,
press the corresponding button among preset
buttons 1 to 6.
42
CQ-VX999EWi