Panasonic CQ-VX999EW - Manual (Page 17)

Preout (External Output) Switching
Connect an optional power amplifier (CY-A/I9054EN, for example) and set it to suit your system.
Your unit has a preout for rear output and another for sub-woofer/front/rear output. The operating
procedures for the possible setting of preout (sub-woofer/front/rear) outputs are described in this section.
Press and hold SUB ® W for more than 2 seconds to switch the output
mode as follows:
(Preout default; SUB ® W)
PREOUT SUB®W
(Sub-woofer output)
i
PREOUT THRU
(Through output)
In case of connecting sub-woofers that
emphasize bass;
Volume level, delay time adjustment,
and cutoff frequency can be set.
In case of connecting speakers for
normal system upgrading:
Volume level adjustment and front/rear
switching can be made.
Preout Output Volume Adjustment
(common to SUB*W and THRU)
0 Press SUB • W to select LEVEL SELECT (See page 18.)
® Press or to decrease or increase the volume.
(Default: 0 dB)
Adjusting range: -o® dB <—lOdB -i-IOdB (at 2-dB intervals)
“oo dB: No output from the amplifier connected to
the preout terminal (No sound is produced.)
Note:
• When a setting mode is selected but no operation is made within 5 seconds, the display will return
to the normal mode. In such a case, press SUB«W again and repeat the setting procedure.
• These operations cannot be performed in Direct Memory mode or Navi Mute mode.
17
CQ-VX999EW