Setting thru, Output – Panasonic CQ-VX999EW User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting THRU

Output

Connect an optionai power ampiifier (CY-M9054EIM, for example).

The volume of THRU output changes as a balance adjustment is made on the internal amplifier. Set

THRU output to operate with either the front or rear speakers according to the mounting position of
additionally installed speakers, (Default: FRONT)

Normal mode

LEVEL SELECT

(See Page 17)

F/R SELECT

Note:

® THRU output is stereo.

® No operation can be performed in Direct Memory mode or Navi Mute mode.
© When a setting mode is selected but no operation is made within 5 seconds, the display will return

to the normal mode. In such a case, press SUB»W again and repeat the setting procedure.

Adjusting the Volume of Additional

Speakers to Internal Amplifier/Switching

Interlock with Balance Adjustment

(X^ Press and hold SUB ® W for more than 2 seconds to select

PREOUT THRU.

@ Press SUB ® W to select F/R SELECT.

(X Press or to switch FRONT or REAR.

CQ-VX999EW