I i] ^ 3 d, Motuwethfr- motuwethfrsa— su motuwethfr sa – Panasonic NV-F70EA User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1
For Everyday Recording
For Everyday Recording, you have the choice between
3 different modes; Monday through Friday, Monday through
Saturday, and Sunday through Saturday.
MOTUWETHFR-
MOTUWETHFRSA—
SU MOTUWETHFR SA-
For example: Programme time for timer recording every day from 10:30 to 11:45 on timer programme number 8 . Programming for everyday recording can be made on any 1 - 8 . Execute the operation steps O fo O. ^ Press the (-) Button until the desired type of Everyday Recording ((T), (g), @) is displayed. Perform the operation steps O to To Confirm the Programme of a Timer Recording Make sure that the VTR is turned on. Make sure that the Timer Record Function is set to “On”. The preset channel and start and ending times of the timer recording will be indicated for about 12 seconds. To Cancel a Timer Recording Make sure that; the VTR is turned on, 0 Press the Check/Programme Button repeatedly, until the number of the timer programme that you want to 0 Press the (+) and (-) Buttons simultaneously for more than 3 seconds. •After the programmed timer recording has been made, set the Timer Record Function to “Off", oth • During recording, the programme position (channel) on the VTR cannot be changed. •When you want to watch TV after setting a timer recording, select the desired channel on the TV set. •To cancel a timer recording during recording, set the Timer Record Function to “Off”. • It is impossible to confirm programmes of timer re cordings while an OTR is being performed. •To turn the VTR on and use it for playback or re cording before the timer recording is performed, set •When the Timer Record Function is set to “On" but no video cassette is inserted or no timer recording 0 will flash to inform that the timer recording cannot be performed. • If no cassette is inserted in the VTR, the “B” Mark will flash. SP DM (start time) SP (end time) I i] ^ 3 D (4 seconds) PROG H ’li (next 8 seconds) 33
of the timer programme numbers
Select the programme number to be checked, by repeated
ly pressing the Check/Programme Button.
the Timer Record Function is set to “Off".
cancel is displayed.
erwise the VTR cannot be operated normally.
the Timer Record Function to “Off”.
has been programmed, the Timer Recording Indi
cator