Playback (cont’d), If jl 0, I b—i i – Panasonic NV-F70EA User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PLAYBACK (CONT’D)
n
» 9
1
1
if Jl
0
^
™ I B—I I
r r ' M
rj
DDOaf^T
n
~ ■■■ /
iffp' r-t—i a ojanp
1
NOISE FILTER
__________ l/EDIT
1
OFF (
ONi*.ON—•
□
REW/S
PLAY/X2
0/FF
> » Rewind and Fast Forward Press the Rewind ◄◄/Review @ Button to rewind the tape. REW/B Press the Fast Forward ►►/Cue Q Button to wind the Auto Cue and Play When inserting a video cassette which has the erasure prevention tab removed playback will start automatically. If mode until the recorded part is reached, then it changes Button (►) for normal playback. This applies only to previously unused tapes. Tapes which have been erased or re-recorded will not exhibit this feature. Noise Filter/Edit Selector EDIT ON: For editing operations such as dubbing. OFF: For ordinary use of the VTR. •When the Noise Filter/Edit Selector is set to “EDIT ON", the picture sharpness cannot be adjusted with the Picture Sharpness Control. r 0/FF » Lap Time Counter It shows the elapsed recording or playback time. I Hours I Seconds I Minutes The indication will appear when the tape is rewound further than the tape counter position “0:00.00’’. • If the figures on the Tape Counter do not change during Fast Forward, Rewind or any of the Playback •The Tape Counter is automatically reset to “0:00.00" when the video cassette is inserted. 22
tape forward rapidly.
nothing is recorded on the part of the tape where playback
is started, the VTR will automatically be in the Cue playback
back to normal playback mode. When the Search Indicator
is lit, the Cue playback will continue to operate, even after
the recorded part is reached. Therefore press the Play/x2
NOISE FILTER ON: For playback of tapes with inferior
picture quality caused, for example, by repeated dubbing.
functions, this means that nothing is recorded on
that tape section.