Panasonic NV-F70EA - Manual (Page 31)

TIMER RECORDING
The programming of timer recordings is possible both on
the VTR itself and via the Remote Controi Unit.
Programming of as many as 8 timer recording is possibie
up to one month in advance.
TRACKING
BAND
AFC
CLEAR TIMER
RECORDING REC
PROG
❖
NE)CT
□ D H
tg
It
Preparation
• Make sure that the clock shows the present time correctly.
• Make sure that the Timer Record Function is set to “Off’.
• Set the Input Signal Selector to “Tuner".
• Insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
For Example:
Programming a timer recording for a TV programme that
will be broadcast on Wednesday, October 27, from 10:30 to
11:45, on programme position (channel) 12, on timer pro­
gramme number 2. (Present date=October 10,1999)
0 Press the Check/Programme Button to select the next
unoccupied timer programme number.
• Press the Tape Speed Selector Button until the Indi­
cator of the desired tape speed (“SP” or “LP") is lit in
the Multi-Function Display.
SP
_iC
CHbCK
PROG
0 Press the Next Button.
O Press the ( 4 -) or (-) Button to set the date.
0 Press the Next Button.
0
Press the
(-I-)
or (-) Button to select the hour of the
starting time of the TV programme.
0
Press the Next Button.
0
Press the
(-I-)
or (-) Button to select the minute of the
starting time of the TV programme.
0
Press the (+) or (-) Button to select the programme
position (channel) on which the TV programme will be
broadcast.
31