Panasonic TC-43P15 - Manual (Page 42)

Main Menu Operation
Picture Menu Operation
9
w,
V i o •
m
SELECT RCCES! 9 № V iO " @
apaHinaaaig
S3S COLOUR
n*a3a NTSC-TINT
■S'ja BRIGHT
□163 CONTRAST
0)3a SHARPNESS
MAIN MENU
a
1. Push the “Main Menu” button.
2. Select the “PICTURE” menu by pushing
the Position Left "<” or Right “>” button
and Access the “Picture” menu by
pushing the Position Up ‘V or Down “v”
button.
3. Choose the option and adjust by pushing
the Position Up “ a ” or Down “ v ” button,
and by setting with the Position Left “<”
or Right “>” button.
Picture Menu Function
DYNAMIC For viewing in brighter environments.
This menu selects a higher than normal
level of Contrast.
STANDARD For viewing in normal (evening lighting)
environments.
This menu selects the normal levels of
Brightness and Contrast.
SOFT For viewing in a dark room.
This menu selects reduced levels of
Brightness and Contrast.
GAME For playing TV GAME. *
1 . You can change the level of each Function
{COLOUR, NTSC-TINT, BRIGHT,
CONTRAST, SHARPNESS) for each Picture
Menu.
2 . Picture Menu mode will be memorized for
each TV, AV1, AV2, AV3 and AV4 mode.
Note
# Do not allow a still picture to be displayed for an
extended period, as this can cause a permanent
after-image to remain on the Projection TV
screen.
Examples of still pictures Include logos, video
games, computer images, teletext and images
displayed in 16 ; 9 mode.
Item
COLOUR
NTSC-TINT
BRIGHT
CONTRAST
SHARPNESS
Effect
<] D>
<1 0
DuKtr BrioMtr
<1 D>
Indicator
n «CONTRAST
m sjsHAiwHeM
Note:
(1) When the to Multi PIP mode and Picture-in-
Picture mode, the main and sub pictures are
both adjusted simultaneously.
(2) Even if the TV is not set to “NTSC” mode,
“NTSC-TINT’ will be displayed and level
adjustment would be possible. But it would
not function.
(3) When the TEXT mode, COLOUR, NTSC-
TINT and SHARPNESS will not displayed.
f'Helpful Hint ([ElNormalization)
By pushing the Normal “N” button on the Remote Control while the Picture Menu is displayed, the selected Menu wiil be changed to
the Normal mode.
Normalization will not occur if the Menu is not displayed when the “N" button is pushed.
The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.