1/f remote connector (l/f remote), Power indicator, Cable clamp – Panasonic Convertible Camera AW-E800 User Manual

Page 11: G/l input connector (g/l in), Optional card slot, Dc 12 v input connector (dc 12v in), Cautions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

11.1/F Remote Connector (l/F REMOTE)

Input terminal dedicated to control signals from the

optional Remote Control Box (RGB) (WV-CB700A)
and the RCU (WV-RC700A, WV-RC550) and the
camera pan/tilt unit (AW-PH300),

* WV-CB700A is connected through the optional RGB

cable {AW-CA50T10/AW-CA50B10),

* WV-RC700AA/VV-RC550 is connected through the

optional RCU cable (AW-CA50A26),

* AW-PH300 is connected through the optional pan/

tilt unit cable {AW-CA50T15/AW-CA50A15).

12. Power Indicator

Red LED lamp lights to indicate that the specified
DC power is supplied to the camera.

14. Cable Clamp

Clamp the DC Power Supply Cable (AW'CA4T1)
connected to the DC 12 V Input Connector to pre
vent it from slipping out.

15. G/L Input Connector (G/L IN)

Signals synchronized with the reference signal are

to be supplied to this connector when the camera is
to be synchronized with the reference signal BB.

16. Optional Card Slot

Slot for inserting an optional card. For details, refer
to the manual for optional cards.

13. DC 12 V Input Connector (DC 12V IN)

12 V DC is supplied through the optional DC power

supply cable (AW-CA4T1).

($K^

- Cautions--------------------------------------------------------------------

Connect this to a DC 12 V class 2 power supply

only.

To prevent fire or shock, the UL listed wire VW-1,

style 1007 should be used as for the cable for DC

12 V Input Connector,