Panasonic SC-AK90 User Manual
Panasonic, Cd stereo system
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- Before use
- CAUTION
- .0
- S
- nwa
- .0
- 1. Open the rack panel.
- 2. Slide the loader carriage to the slot you want.
- 3. 0 Lower the lever on the loader carriage and set the CD in the groove with the label facing to the right.
- © Raise the lever.
- 4. Close the rack panel gently.
- 1. Open the rack panel.
- 2. Slide the loader carriage to the slot you want.
- 3. Lower the end of the lever and then remove CDs.
- Press CD.
- Set CDs in the rack.
- Turn JOG to select the desired CD number.
- Press CD.
- Turn JOG to select the desired CD number.
- Press OPEN to open the rack panel, and set the CD in the slot No. 0.
- Close the rack panel and press SINGLE
- Press REPEAT before or during play.
- Press RANDOM.
- Program play
- Program play
- f[\ Press DISC/TRACK to select the CD selection mode.
- J-\ Press DISC/TRACK to select the track selection mode.
- Press CD.
- Q Press CD MANAGER to select ‘ 1-DISC”. El
- Q Press DISC/TRACK to select the CD selection mode.
- Press CD.
- Q Press CD MANAGER to select “1-ALL”. Q
- Press or ^ to start playback.
- n Press DECK 2 ^ OPEN, and then insert the tape.
- Press DECK 2 ^ OPEN, and then insert the tape.
- Press REV MODE to select the reverse mode.
- Set CDs in the rack.
- Press DISC/TRACK to seiect the CD selection mode.
- Turn JOG to seiect the desired CD number.
- o
- Press CD.
- Press CD MANAGER to select **1-TRACK”. Q
- Press DISC/TRACK to select the CD selection mode.
- Turn JOG to select the desired CD number. El
- Press DISC/TRACK to select the track selection mode.
- jcl Press DISC/TRACK to select the CD selection mode.
- o
- c
- o
- o
- tt
- g Press TAPE DECK 1/2.
- g Press ^ OPEN on both decks, and then insert the tapes.
- Press REV MODE to select the reverse mode.
- Press TAPE EDIT to start recording.
- Selecting sound quality and field
- Press 3D SPACE EQ to select sound quality and field.
- To boost bass
- Press LEVEL to select the desired level.
- Adding bass
- Press V. BASS.
- o
- Press KARAOKE to select the voice mode.
- First, lower volume with MIC VOL then, connect the microphone to MIC 1 and/or MIC 2 jacks.
- o
- Press CLOCIVriMER to select “© PLAY’
- 0 Press V or A to select the starting hour.
- 0 Press MEMORY/SET.
- 0 Press V or A to select the ending hour. ©Press MEMORY/SET.
- 0 Press V or A to select the ending minutes. @ Press MEMORY/SET.
- Select the desired source and then prepare for playing.
- Press © REC/© PLAY to select “© PLAY”.
- Press CLOCIVTIMER to select “© REC”.
- © Press V or A to select the starting hour.
- © Press V or A to select the ending hour.
- Select the desired source and then prepare for recording.
- Prepare for recording.
- Press © REC/© PLAY to select “® REC”.
- Problem
- Probable cause(s)
- Suggested remedy
- Problem
- Probable cause(s)
- Suggested remedy