Panasonic SC-AK90 - Manual (Page 25)

To record 1 CD only (1’DISC)
n Press CD.
Q Press CD MANAGER to select “1-DISC”. El
Every time you press the button;
1-TRACK-*1-DISC->1-ALL------------------ ,
NORMAL<------Previous display*—I
(OFF)
jcl Press DISC/TRACK to select the CD selection
mode.
(The indicator illuminates with a green color.)
FI Turn JOG to select the desired CD number. Q
g Press #REC/STOP.
The selected CD will be recorded.
To record the same numbered track on all
CDs (1-ALL)
n Press CD.
g Press CD MANAGER to select “1-ALL”. El
Every time you press the button;
1-TRACK-.* 1-DISC—1-ALL--------------- ,
^—NORMAL*------- Previous display*—'
(OFF)
g Press DISC/TRACK to select the track selection
mode.
(The indicator illuminates with a red color.)
FI Turn JOG to select the desired track number. Q
g Press • REC/STOP.
The same numbered track on all loaded CDs will be recorded in
order.
When recording ends
"NORMAL" will appear on the display for about 3 seconds,
then the CD MANAGER function will turn OFF automati­
cally.
To Stop recording
•To add a 4 second silent interval before stopping
Press ■ . The CD will automatically stop too.
•To stop recording without a silent interval
Press # REC/STOP, The CD will stop automatically too.
When you select the wrong CD or track
The same reselection procedure is used with all three modes.
Perform this procedure before recording starts.
To reselect a CD
1. Press DISC/TRACK to select the CD selection mode.
2. Turn JOG to select the desired CD number.
To reselect a track
1. Press DISC/TRACK to select the track selection mode.
2. Turn jexS to select the desired track number.
For your reference
During 1-ALL recording mode, if the selected track is not
found on a certain CD, the changer automatically skips that
CD and continues recording from the next CD.
W)
C
.0
£
5
I
o>
.C
■S
o
u
6