Panasonic PV M939 - Manual (Page 8)

One Time Setup
When the Combination VCR is turned on the
first time, setup mode is entered automatically.
Process of Setup
I o Q j EBBSI o I
Language eh Channel Ba Clock
1
m
Press POWER on the
Combination VCR.
2
SELECT U\NGUAGE
PUSH CH À. : English
OPRIMIR CH T ;Español
APP. VOL + : Français
Select the language.
for English
for Spanish
(Español)
for French
(Français)
If wrong language is set, do
“Reset all Combination VCR
Memory Functions" steps page 5.
If you use a cable box, the cable
box must be left on.
3
CHANNEL/CLXK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU use A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN, . .
PLEASE PUSH CH UP KEY
Start Channel Auto Set
and Clock Auto Set.
Press CH A.
CH AUTO SET PROCEEDING
t
AUTO CLOCK SET
PROCEEDING
Case 1
t
(Setup completed)
7/28/1999 B 12:00PH
DSTtON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
END ; PUSH CH UP KEY
POWER
2 VOLUME
2 CHANNEL
UP/DOWN
Case 2
(Setup incomplete)
Press CH A to exit.
• If your area observes
daylight saving time, but
you would like to turn the
DST feature off, do the
Reset Clock steps on
page 37 and set DST:OFF.
If your area observes daylight saving time
and DST is set to ON, but the time is
incorrect: do the Time Zone Adjust steps
on the next page.
AUTO CLOCK SET
is INCOMPLETE
PUSH ACT 10N TO SET CLOCK
See Case 2
next page.
IMPORTANT NOTE FOR AUTO CLOCK SET
• Auto clock set is performed the first time when Combination VCR is turned off each day. If used, a cable box must be left
on and tuned to the PBS channel at the time Combination VCR power is turned off if you want auto clock set to be done.
• If used, a DSS receiver, it must be turned off for auto clock set.
• If Cable Box or DSS receiver is connected to Combination VCR via AudioA/ideo Jacks, an RF coaxial cable must also
be connected for auto ciock set and channel auto set features.
• If for any reason the time is changed manually, automatic time correction will not occur.
8
For assistance, call 1-800-211-PANA(7262)