Panasonic PV M939 - Manual (Page 16)

TV Timer Features
ON-TIMER with Alarm
Combination VCR can be set to automatically power on in one
of 3 modes fPV, Playback, or FM radio.) You can also combine the
On-Timer with a one minute alarm that gradually increases in volume.
1
Display ON TIMER
screen.
Press ON-TIMER.
2
------ \f/ON,P>IMER
alaf ^N di /I''
SELECT HOUR
SELECT;A ▼ KEY
CpT • ► KFY
END :ON-TI№RKEY
ON-TIMER mode selection order
^CH02—CH03 CH125
CH01
^FM9—FM8- ■FM1-
Set the ON-TIMER DATE.
1) Press AT to
select.
2) Press ► to set.
• Make sure a tape is
inserted if Playback
mode is selected.
• See "FM Radio Setup”
on page 20 and 21 for
instructions on how to
preset FM stations.
T
PLAY
3
ON TIMER ..................
6;00AM CH08
ALARMrON
SELECT ALARM
ABC
CANCO.
SELECT
SET
END
ADO/DLT KEY
A ¥ KEY
¥ ► KEY
ON-TÌMER KEY
Set Alarm.
Press AV to
select “ON” or
“OFF.”
When “ON” is selected,
an alarm will gradually increase in volume for one minute or
until cancelled by pressing any button (including VOL .)
To Make Corrections,
use AT and to move back and correct as necessary.
Set ON TIMER.
{ timer J)
Press ON-TIMER.
- - - - - - - - - - - - - - - ^ - - - - - - - - - - - - J • ON TIMER indicator lights on the
Combination VCR.
To cancel ON-TIMER set,
press ON-TIMER to redisplay the screen in step 3. Then, press
ADD/DLT to clear the time (“6” is flashing.) Now, press ON-TIMER
to end. “ON TIMER END" appears on-screen for a few seconds.
If no button on the remote or Combination VCR (including a button
used to turn off the alarm) is pressed within 60 minutes after
Combination VCR turns itself on, it will turn itself back off.
SLEEP TIMER
Combination VCR can be set for auto power off.
SLEEP TIMER 30
♦
SLEEP TIMER 60
♦
SLEEP TIMER 90
♦
SLEEP TIMER 00
I_____________
16
|\yf Check list before you begin.
□ The clock is set to correct time.
CH DOWN
VOL UP
VOL DOWN
.rJ. ;■ ___
■JkOril ^^*ClSE.J;'STOR-. ¿PEED'
Set SLEEP TIMER.
Press SLEEP repeatedly.
• Pressing DISPLAY with sleep timer
set displays remaining time.
To Cancel, press SLEEP repeatedly
until “SLEEP TIMER 00" appears.
For assistance, call 1-800-211-PANA(7262)
DISPLAY
ADD/DLT