Panasonic PV M939 - Manual (Page 24)

Tape Operation (continued)
Direct Access (For Normal and/or Timer recordings)
Go directly to the desired recording.
^ INDEX Display INDEX screen.
Press INDEX in Playback or
Stop mode.
• If there are no Timer Recordings
on the Program Index List or
when using DC Power supply, go
to step 3.
2
INDEX
PROGRAM INDEX SEARCH
INDEX SEARCH
SELECT:A ▼ KEY
SET ;► KEY
END :INDEX KEY
Display INDEX screen.
1) Press AT to
select “INDEX
SEARCH.”
2) Press ► to
display.
• This screen appears
only if there are
Timer Recordings.
Select the recording
number.
Prpce
NUMBERED
keys.
• To calculate number,
see below.
O © ©
O © ©
o ® ©
© ®
start search.
Press FF or REW.
• When search is
finished, playback
begins.
To calculate the Index Number
Example 1:
If you are watching recording 4 and you want to watch recording
2,
enter
3 in step "3" and press REW.
L-
2
3 4 5
6
7
Example 2:
If you are watching recording 2 and you want to watch recording 6,
enter 4 in step “3" and press FF.
1 2 3 4 5 6 7
NOTE: I indicates start points of each recording.
VHS Index Search System is ...
Each time recording is made, an
invisible index mark is placed on the
tape. When timer recordings are made,
program index and information are also
included. (Only AC POWER) These
index marks can be used to access or
scan recordings.
4 REW 4
SELECT/
SET
A :CH UP
T :CH DOWN
► :VOL UP
— “I INDEX
3
NUMBERED
keys
F F o r R E W
24
Make each entry within 10 seconds, or
the Index Search mode will be canceled.
If these VHS Index Search Systems are
started very close to an index mark, that
index mark may not be counted in the
search.
For assistance, call 1-800-211-PANA(7262)