To display or remove the overlay, Warning and instruction displays, On-screen displays (osd) – Panasonic PV M939 User Manual
Page 38: Vcr status & clock display, Blue screen display, Channel & function display, Dew detection system, Press display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

On-Screen Displays (OSD)
VCR Status & Clock Display
To display or remove
the overlay.
Press DISPLAY.
Function Status Current time Channel Caption
Rec Time
Remaining _
(OTR mode
only see
page 13.)
REC
-0:25
12:00PM ABC
-0:12:34-
SP
12/27/1999 MON
12:00PM -
1:00PM
CH 08 ABC MOVIE
MEMORIAL MOVIE
Counter
Time
Stamp
Data
Tape
Speed
{see pages 28, 29.)
Blue Screen Display
Whenever a blank section of a tape comes up in Play
mode, or when the selected channel has no broadcast
signal with the “Weak Signal Display ON/OFF” (page
30) set to “OFF,” the TV screen will turn solid blue.
Channel & Function Display
When a function button is pressed (PLAY,
FF, etc.) or you change channels, the
Combination VCR mode or channel number
will be displayed.
(Some station names may also appear if
Channel Caption is set. See pages 26, 27.)
Dew Detection System
To prevent damage to your tapes, this unit is
equipped with a dew detection system. When
moisture condensation is detected inside the
Combination VCR, “DEW” will appear on
screen for a few seconds. If a tape is
inserted, it will be ejected. Also, VCR
functions will be non-operational until dew
condition passes. Press DISPLAY to see if
dew condition still exists. In order to avoid
this condition, try not to move the unit directly
from a cold place to a warm place. TV
functions are not affected.
Warning and Instruction Displays
These
displays
will
alert
you
of
a
missed
operation or provide further instructions.
OSD
Caution
Pg
OSD
Caution
Pg
NO CH FOUND
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PUSH CH UP KEY AGAIN
If no active channels
are found for
CHANNEL
MEMORY...
6
NO CASSETTE
PLEASE INSERT A CASSETTE
If you press PLAY, FF,
REW, or REC on the
remote control or the
Combination VCR without
a cassette inserted...
12
13
PLEASE SET CLOCK
BEFORE PROGRAMMING
If you attempt to set or
review a Timer
Recording or set the
On-Timer and the
Clock is not set...
8
9
37
DEW
If moisture condensation
is detected inside the
Combination VCR...
38
CHECK CASSETTE
RECORD TAB
If you press REC on
the remote control or
the Combination VCR,
and a cassette is
inserted with no record
tab,..
4
13
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END: PLAY KEY
If head cleaning becomes
necessary while playing
back a tape...
5
TO CANCEL TIMER REC
HOLD DOW N STOP KEY
FOR APPROX 3SEC
If you press STOP
during a Timer
Recording...
15
VCR LOCK ACTIVATED
If you press a function
button other than
STOP/EJECTor POWER
while the Combination
VCR is in VCR Lock
mode...
30
38
For assistance, cal) 1-800-211-PANA(7262)