Panasonic PV M939 - Manual (Page 12)

Playback a Tape
Features for Quality Picture
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manuai Tracking Controi fto reduce
picture noise)
Use during Playback and Slow Motion mode to
reduce picture noise.
Press the 3 or 6 NUMBERED key on the remote
control or CH AT on the Combination VCR until the
picture clears up.
To return to Auto Tracking, press POWER off, then
on again a few seconds later.
□ All connections are made (see page 6.)
Q Your Combination VCR is plugged in.
|\^Check list before you begin.
Insert a cassette.
To prevent tape jam
Inspect your cassette tapes and
remove any loose or peeling labels.
2
PLAY
Press PLAY.
• Playback begins if cassette
has no record tab.
To Find a Particular Scene
Forward Search -» Press FF
Reverse Search Press REW
For view Slow Motion
Press SLOW
(To release, press SLOW)
For view Still (Freeze) picture
Press PAUSE
(To release, press PAUSE)
For view Frame by Frame picture
Press SLOW in the Still mode
(To release, press PAUSE)
After Combination VCR is in Still or Slow mode for 3 minutes, it
will switch to Stop mode automatically to protect the tape and
the video head.
■ To Stop Press STOP
■ To rewind tape Press REW In stop mode
■ To eject tape Press EJECT on the remote or
STOP/EJECT on the Combination VCR
You can operate on the Combination VCR
1
Insert a cassette.
^^¿o)CEKiE>Cvjj;J : lOCOX <> <> " »
V
2
Press PLAY.
Press to stop and/or eject tape.
12
For assistance, call 1-800-211-PANA(7262)