Setting the remote code, To check the remote code – Panasonic KX-TC1891B User Manual
Page 75
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Remote Code
The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any
2-digit number (00-99).
The factory preset remote code is “11". If you do not program your own
remote code, you can use “11”.
Make sure the unit is in the standby mode.
1
7
8
Press
fFUNCTION/EXir/^.
Press @ or ® repeatedly until the arrow
points to
“Program”.
Press
FWD/EDIT
®
(Yes
key).
Press Q or (3 repeatedly until the arrow
points to
“
tad
program”.
Press
FWD/EDIT
B
(Yes
key).
•The base unit display shows the function menu
for the answering system.
Press (T)-
•The current setting is displayed on the base
unit.
Enter a remote code using a
2-digit
number (00-99).
Press
FWD/EDIT
B
(Save
key).
•A beep sounds.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
•To return to the standby mode, press [FUNCTION/EXIT/CHl.
Ringer volume
►Program
TA
►-Yes
►Save DIRECT#
Set flash time
TA
►=Yes
Talk switching
►
tad
program
TA
►=Yes
Answering
system setting.
See base unit.
Base unit display
• If 6 beeps sound during programming, a wrong key was pressed. Enter the
correct number.
To check the remote code
Repeat steps 1 to 6.
•The current remote code is displayed on the base unit. When finished, press
f
f un c t i o n
T
e x i t
/
c h
j.
75