Panasonic KX-TC1891B - Manual (Page 37)

Answering Calls
When a call is received, the unit rings, “incoming call” and the called
line are displayed on the unit. The called line status icon on the handset
and the called line button on the base unit flash quickly. The line is
automatically selected when you answer the call. (To change the line
selection, see page 66.)
If you subscribe to a Caller ID service, the calling party information will be
displayed after the first ring (p. 38). In order to view the Caller ID
information, please wait until the second ring to answer a call.
With the Handset
Lift the handset off the base unit and press
[TALK].
•The called line status icon stops flashing,
•You can also answer a call by pressing any dialing
button [o) to ®. ® or ® {— Any Key Talk).
•You may answer a call by pressing the line
button instead of [TALK],
•When the ringer volume is set to “OFF”,
the selected line(s) will not ring (p. 23).
Auto Talk
If you set the Auto Talk feature to ON (p. 22),
you can answer a call by lifting the handset off
the base unit without pressing (TALK).
Display
[TALK]
When the headset is connected {p. 20), make sure to use the
headset to talk with the caller. If you want to have a normal cordless
phone conversation, disconnect the headset.
With the Base Unit
1
Display
Press [DIGITAL SP-PHONE).
•The DIGITAL SP-PHONE indicator
and the line button light.
Talk into the MIC.
To hang up, press
[DIGITAL SP-PHONE].
•You may answer a cat! by pressing the tine
button instead of [DIGITAL SP-PHONE
DIGITAL SP-PHONE]
and Indicator
•When the ringer volume is set to “OFF", the selected line(s) will not ring (p. 24), 37