Panasonic KX-TC1891B - Manual (Page 47)

One-Touch Dialer
A phone number stored in the [DIRECT] button can be dialed with
a one-touch operation
Storing a Phone Number in the DiRECT
Button
Make sure the unit is in the standby mode
Press (FUNCTION/EXIT/CH) 1
Press 0 or Q repeatedly until the arrow
points to “Program”
Press FWD/EDIT® (Yes key)
While the arrow points to “Save
DIRECT#”, press FWD/EDIT® (Yes key)
Enter a phone number, up to 48 digits
• Each time you press
(INTERCOM/HOLD/CLEAi^.
the digit to
the left of the cursor is erased To erase all of
the digits, press and hold
(INTERCOM/HOLD/CLEA^
•The last 32 digits number you entered will be
displayed To confirm the remaining number,
press
BACK (3 o r FWD/EDIT ®
Press (Next key)
• If you want to edit the entered number, press
[5 (Edit key) and return to step 5
Press FWD/EDIT E (Save key)
•A beep sounds
•To return to the standby mode, press
¡FUNCTION/EXIT/CH]
►Save DIRECT#
Set flash time
TA ►=Yes
□
▼=Next
1234567890123456
7890123456789012
4 k T=Next
1234567890123456
7890123456789012
A=Edit ►=Save
1234567890123456
7890123456789012
Save DIRECT#
•You can exit the programming mode any time by pressing [
FUNCTION/EXIT/CH]
• If a pause is required for dialing,
[REDIAL/PAUSE]
can be stored in a phone
number counting as one digit (p 64) in step 5
47