Panasonic KX-TC1891B - Manual (Page 21)

Programmable Functions
You can program the following function items
using the handset near
the base unit
The display shows the programming instructions See the
corresponding pages for function details
Make sure the unit is in the standby mode
Press
[FUNCTION/EXIT/CHl
\
* *
►save directory
Ringer volume
Program
To store an item in the directory (p 50)
To select the ringer volume (p 23)
Press
FWD/EDIT ®
*
c ---------- N
► save DIRECT#
Set flash time
Set line mode
Set dial mode
Line selection
Incoming call
Talk switching
TAD program
V ____________ )
To store a phone number in the DIRECT button
(P 47)
To select the flash time (p 65)
To select the line mode (p 19)
To select the dial mode (p 18)
To change the line selection (p 66)
To set the incoming call tone (p 67)
To set the auto talk feature (p 22)
To program answering system functions {p 27)
During programming
‘To select a desired function item, press or repeatedly until the
arrow points to the item Then press
FWD/EDIT
O to go to the next step
• If the handset displays "No link to base Place on cradle and try
again ” and an alarm tone sounds, move closer to the base unit and try again
•You can exit the programming mode any time by pressing [ FUNCTION/EXIT/CH]
• If you do not press any buttons for 60 seconds, the unit will return to the standby
mode
21