Incoming call tone – Panasonic KX-TC1891B User Manual
Page 67
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Incoming Call Tone
While one line is being used, you can be informed if another call arrives
on the other line by two tones This incoming call tone can be set/deleted
by programming Your phone comes from the factory set to “2”
Make sure the unit is in the standby mode.
1
Press [
FUNCTION/EXIT/CH]
Press ® or@ repeatedly until the arrow
points to
“Program”
Press FWD/EDIT®
(Yes
key)
Press or (3 repeatedly until the arrow
points to
“incoming call
Press
FWD/EDIT®
(Yes
key)
•The current setting is displayed
On
The incoming call tone will be heard
for as long as the other line rings
2 The incoming call tone will only be heard
2
times (factory preset)
Off
The incoming call tone will not be heard
Line selection
►incoming call
TA
►=Yes
Incoming call
tone On
TA
►“Save
Press or (3 repeatedly until the
desired setting is displayed
Press
FWD/EDIT
(Save
key)
•A beep sounds
•To return to the standby mode, press
(FUNCTION/EXIT/CH I
Incoming call
tone 2
TA
►=Save
►You can exit the programming mode any time by pressing [
FUNCTION/EXIT/CIT
67