Selecting the dialing mode, Settings – Panasonic KX-TC1891B User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^ Settings
Selecting the Dialing Mode
IF you have touch tone service, set to “Tone" If rotary or pulse service is
used, set to "Pulse" Your phone comes from the factory set to ‘Tone"
Make sure the unit is in the standby mode
1
Press
(FUNCTION/EXIT/CH:
Press [5
repeatedly until the arrow
points to
"Program"
Press
FWD/EDIT(B
(Yes
key)
Press
l3
Of
(3
repeatedly
until
the
arrow
points to
"Set dial mode"
Press
FWD/EDIT(B
(Yes
key)
Press (^) or (5 to select
"Pulse"
or
“Tone"
Press
FWD/EDIT
(Save
key)
■ A beep sounds
■ To return to the standby mode, press
[FUNCTION/EXIT/CH]
►Program
TA
► =Yes
Set
1 me
mode
► Set dial
mode
ТА
► =Yes
Dial
mode
Tone
ТА
►=Save
Dial mode
Pulse
'You can exit the programming mode any lime by pressing [
FUNCTION/EXIT/Chp
'If either line has rotary or pulse service, set to
"Pulse"
When making a call
using a line which has touch lone service, press
[TONE)
First and then dial the
number