Hands-free digital speakerphone, To redial the last number dialed on the base unit, To put a call on hold – Panasonic KX-TC1891B User Manual
Page 36: To release the hold, What the line buttons mean (base unit), Making calls, Loud
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^ Making Calls
Hands-free Digital Speakerphone
For best performance, please note the following
■ Talk alternately with the caller in a quiet roDm
■ If the Other party has difficulty hearing you, press VOLUME (3 decrease
the speaker volume
■If the other party's voice from the speaker cuts in/out during a conversalion,
press VOLUME (3 decrease the speaker volume
To adjust the speaker volume (B levels) while talking
To
increase,
press
VOLUME
Q
To decrease, press VOLUME Q
Loud
To redial the last number dialed on the base unit
Press [DIGITAL SP-PHONE) or a line button ^ [REDIAL/PAUSE;
To put a call on hold
Press [LOCATOR/INTERCQM/HOLP]
■ The DIGITAL SP-PHONE indicator goes out, and
the called line button on the base unit and the
called line status icon on the handsel flash
To release the hold
Press
the
line
button
on
the
base
unit
which
is
flashing
or
the
line
button
on the handset whose status icon is flashing
■ If another phone
is
connected on the same line (p 0B), you can also release
the hold by lifting its handsel
What the line buttons mean (Base unit)
Off
The line is free
On
You are using the line on the base unit
Flashing twice
every 2 seconds
Someone else is using the line on the handset
or parallel connected telephone
Flashing
A call IS on hold
The answering system is operating on a call
Flashing quickly
A call 15 being received
36