Panasonic KX-TC1891B - Manual (Page 27)

Programming Summary for the Answering
System
You can program the following functions using the handset near the
base unit See the corresponding pages below for details
The unit must be in the standby mode before programming.
Lift the handset, and press (FUNCTION/EXIT/CHl
Press H or Q to select “Program”, and press FWD/EDIT (►] (Yes
key)
Press (3 or (3 fo select
“ tad program”,
and press
f w d / e di t
(Yes
key)
• “Answering system setting See base unit " IS displayed OH the
handset
i
• If the handset displays “No link to base Place on
cradle and try again " and an alarm tone sounds,
move closer to the base unit and try again
To adjust
the day and time,
press (page 28)
To set the remote code, press [j] (page 75)
To select the number of rings, press [2] (page 31)
To select the caller’s recording time, press d] (page 30)
•The base unit display shows the setting of the selected adjustment or
function
Press FWD/EDIT [F] {Save key)
•A beep sounds
•To return to the standby mode, press (
FUNCTION/EXIT/ClH]
•To cancel during programming, press
fFUNCTION/EXIT/CHl
Start again from
the beginning
• If 6 beeps sound during programming, a wrong key was pressed Enter the
correct number
27