Selecting the line mode – Panasonic KX-TC1891B User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Line Mode
If the line
IS
connected to a low voltage system such as a PBX, set to “B”
Otherwise the
[TALK]
and/or
[DIGITAL SP-PHONE]
button(s) may not
operate properly Both lines are preset to “A”
Make sure the unit is in the standby mode.
1
5
6
7
Press
[
function
/
exit
/
ck
T
i
Press @ or ® repeatedly until the arrow
points to
“Program”
Press
FWD/EDIT®
(Yes
key)
Press or ® repeatedly until the arrow
points to
“Set line mode”
Press
FWD/EDIT
E
(Yes
key)
Press @
(Linel)
or Q
(Line2)
to select
the desired line
Press or ® to select
“
b
"
or
“
a
”
Press
FWD/EDIT
E (save
key)
•A beep sounds
•To program the other line, start again from
step 4
•To return to the standby mode, press
IFUNCTION/EXIT/CH)
► Save directory
Ringer volume
▼A
►=Yes
► Save DIRECT#
Set
flash time
TA
► =Yes
► Set line
mode
Set
dial
mode
▼A
►=Yes
Line mode
T=Linel A=Line2
Line
mode
Linei A
TA
►=Save
Line mode
Linei B
»You can exit the programming mode any time by pressing i
FUNCTION7
e
XIT/CH1
19