Panasonic KX-F1000NZ - Manual (Page 55)

8
10
Insert the film into the cartridge so that the
arrow on the open cartridge points in the same
direction as the arrows on the film.
•If you insert a fiim which was used halfway,
insert the unused spool of the film on the
“FILM SUPPLY" mark of the cartridge.
•Insert the film
Incorrect
cores correctly
referring to the
illustration to the
Correct
right.
Roll the blue leader of the film by winding the
gears of the core until the leader is no longer
visible.
Close the covers of the cartridge by locking the
four tabs.
Green gear
11
12
13
Turn over the cartridge and referring to the
illustration on the left, place the “BACK” side of
the cartridge into the unit, by inserting the pins
on the sides of the green gears into the green
holders. Then lower the front of the cartridge
into place.
Press the head unit down firmly until it clicks
into place.
Close the top cover securely by pushing down
on both sides.
•If the blue leader of the film is not wound
completely, the unit will automatically advance
it and the following message will be displayed.
LOADING FILM
»If the following message is displayed, the film
is not inserted in the cartridge correctly.
CHECK FILM
Reinsert it correctly by referring to step 8 on
this page.
55