Delayed transmission – Panasonic KX-F1000NZ User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Delayed transmission
The unit can send fax documents automatically at a specific time. This allows you to take advantage of low-cost
calling hours offered by your telephone company.
Delayed transmission can be programmed up to 24 hours in advance.
1
2
Insert the documents FACE DOWN.
Press IMENUI.
SYSTEM SET UP
2 Press [#], then press (D
4
DELAYED XMT
Press ISTART/SETl.
MODE=OFF
[ A T ]
Press
I
or
I
▼
I
to select “ON”.
MODE=ON
[ A T ]
•If this feature is not required, select
“OFF”.
Press fSTART/SETl.
NO. =
Enter the phone number by using
one-touch dialing, speed dialing, full
number dialing or electronic telephone
directory.
FACE DOWN
‘ t
..t. !............. ............................ ...
-■■I '■■■■■;■.........■
...............
■ 1^
iMENUl
Dial keypad iStART/SET! [^/[^
8
9
Press ISTART/SETl.
10
11
TIME=12:00AM
Enter the transmission start time.
Example: 11:00PM
Press
SS®®.
then
press ® to select PM.
To select AM, press d).
Press ISTART/SETl.
Press IMENUl.
•When the programmed time has
come, the unit will automatically start
transmission.
Note:
•If there is no answer or the tine is busy, the unit
will automatically redial the number up to
2
times.
•You can receive, transmit and copy documents
while delayed transmission is set.
•If the programmed start time has passed during a
power failure, delayed transmission will be
attempted soon after power is restored.
•When transmit polling {see page 29) is set to ON,
delayed transmission is not available.