Panasonic KX-F1000NZ - Manual (Page 32)

Remote fax receiving using an extension
If you have an extension phone connected to your facsimile unit or on the same line, it is possible to receive a
fax message to your facsimile unit. Using the extension phone, dial the remote fax activation code.
This saves you from going to the facsimile until and pressing
ISTART/SETI.
Important:
•To activate this feature, use a touch tone telephone as the extension phone.
•The remote fax activation code is set to “ * 9” as a preselected setting.
Using an extension
1 When a call is received, lift the handset of
the extension phone.
When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
press *9 {remote fax activation code).
Replace the handset.
•The facsimile unit will activate the fax
function to receive documents.
To EXT jack or
the same line
Extension phone
Changing the remote fax activation code.
This code can be from 2 to 4 digits in length using the numbers 0 through 9 and the character * .
This code should not be set to “0000”.
1
2
3
4
5
6
Press [MENU!.
Press d), then (4)[Tl.
SYSTEM SET UP
REMOTE FAX ACT.
Press [START/SETl.
C0DE=>|<9
Enter the new code number.
Press I START/SETl.
Press I MENU I.
Dial keypad
I MENU I
ISTART/SETI
Note:
Some special telephone company services will
require you to press a service access code. If you
subscribe to such services, the whole or part of
the remote fax activation code must be different
from the service access code.