Receiving reduction mode – Panasonic KX-F1000NZ User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiving reduction mode
When the size of the documents sent by the other party is as large as, or larger than the recording paper, the
unit can reduce each page of the document and print it out on the recording paper at a suitable reduction rate
below.
The reduction rate is determined by a combination of the size of the recording paper and received document.
■ Recommended reduction rate;
ORF : ' ' ;
A4
Letter
92% (pr^f
A4
A4
72%
A4
Legal
A4 =210 X 297mm (SV/'x irv^g")
Letter=216 X 279 mm (SVj" x 11")
Legal=216 X 356 mm {
8
V
2
"x 14")
To program a reduction rate, proceed as follows.
1
2
3
4
5
6
Press IMENUl.
Press (#], then (Hd).
Press (START/SETl.
SYSTEM SET UP
RX REDUCTION
MODE=92%
[ A W ]
Press or (3 to select the desired
mode.
Press I START/SETl.
Press IMENUl.
IMENU]
Dial keypad [START/SETl
Note:
•This feature is not available when the film/paper
save reception feature is set to ON (page 38).
•Documents received by facsimile frequently have
a heading on the top of each page which contains
the sender’s name/phone number. This increases
the length of each page. Therefore, it is
recommended to use the reduction mode.
•If the appropriate reduction rate is not
programmed, the over-sized document will be
divided.
37