Setting the date and time 1 2, Setting your logo, Setting the date and time – Panasonic KX-F1000NZ User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before using your unit, program the following;
•Current date and time
•Your logo
•Your facsimile telephone number
This information will be printed on the top of each page transmitted from your unit.
5
6
Press IMENUI.
Setting the date and time
1
2
3
4
Press [#), then ®(T)-.
Press [START/SETl.
SYSTEM SET UP
SET DATE & TIME
Enter the correct month/day/year/hour/
minute by selecting each 2 digits.
Then press © for AM or press (S for PM.
Example: Aug. 10 1996, 3:00PM
Press (0)®
d]® ®(D ®®,
then press ® for PM.
Press ISTART/SETI.
Press I MENU].
[MENU]
Dial keypad
START/SETl
[STOP I
Note:
•When you make a mistake while programming,
press (STOPI then make the corrections.
•The accuracy of the clock will be approximately
±60 seconds a month.
Setting your logo
Usually the logo is a company, division or personal name in an abbreviated form.
Press IMENUI. _______________________
1
2
3
4
5
6
to
SYSTEM SET UP
Press ®, then ®®.
YOUR LOGO
Press I START/SETl.
LOGO=
Enter your logo up to 30 characters.
(The preset logo will be cleared.)
•Refer to the instructions on page 11.
Press I START/SETl.
Press IMENUI.
Dial keypad
[MENUl
I START/SETl