Installation connections, Installation connections -2 – Panasonic KX-F50BA User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation Connections
Connect the AC power cord, the telephone line cord and the handset cord as shown
below. Then connect your unit to the AC outlet and the telephone line.
Handset
To AC Outlet
AC 220 V~AC 240 V
Connect to
“TO TEL LINE"
To Single
Telephone Line^Ej|====^
‘TO HANDSET"
Connect to ■
‘TO EXTERNAL TEL"
Reserve Telephone
The unit including the telephone handset will not function during a power failure or
power off. However, if you have a reserve telephone connected to the port of the
“TO EXTERNAL TEL’’, you will still be able to make calls during a power failure
or power off.
Avoid using the same AC outlet for the unit and other equipments.
We recommend you to use an exclusive AC outlet to avoid interference from
other equipment.
If you connect another extension to the same line that your unit is connected to,
do not use another telephone during fax transmission and reception. It will affect
image quality.
This unit is equipped with a 3-wire grounded type plug for safety. This plug will
only fit into a grounding-type power outlet. If you are unable to insert the plug into
your outlet, contact your electrician to replace your outlet.
1-2