Selector settings, Turning the power switch on, Selector settings -12 – Panasonic KX-F50BA User Manual
Page 19: Turning the power switch on -12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■m
•>*«
¥S"
'»^ij
’Mf'
'^€M
Selector Settings
If your line has touch tone service, set the selector to “TONE”. If your line has rotary
pulse dial service, set to “PULSE".
RINGER volume:
HIGH: The ringing sound will be loud.
LOW: The ringing sound will be soft.
OFF:
The unit will not ring.
Turning the Power Switch On
Before turning the POWER switch on, confirm the following:
1. The cassette tape and the recording paper are installed properly.
2. The handset is on the cradle.
Turn the POWER switch to the
“I
(ON)” position. The POWER indicator lights.
When you use the unit for the first time, the ALARM indicator will light. After
recording your outgoing message, the ALARM indicator will go out. See page 1*13.
M 2