Programming phone numbers for speed dialing, Programming phone numbers for speed dialing -21, I ^ ed ed ee ■ 'm ed d – Panasonic KX-F50BA User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
- ' -i/-
ifcriiihd
uMLdiuIUUMMii^ttihy
Programming phone numbers for speed dialing
This unit is equipped with 20 stations (00 through 19), each of which can store a
telephone number for speed dialing. Each phone number can be programmed up to
30 digits long.
Make sure first whether the DIALING MODE selector is set to TONE or PULSE
mode.
Press the
PROGRAM
button.
The PROGRAM indicator lights.
'
"CZICID
CZ
TZDmci
' i ^ ED ED EE
■ 'm ED d
Press the
AUTO
button, then enter the
station number at 2 digits (“00” through
“19”) by using the dial keypad.
Enter the phone number.
If you want to insert a hyphen in the number,
press the HYPHEN key during programming.
HYPHEN is counted as 2 digits.
Press the SET button to store the
programming in memory.
To program other phone numbers, repeat steps
2 to 4.
After programming all the numbers,
press the
PROGRAM
button to end the
operation.
The PROGRAM indicator goes out.
Note:
To correct an error while programming, press the STOP/CLEAR button then
repeat from step 2.
You can print a list of the stored phone numbers. See page 4-2.
1-21