Panasonic KX-F50BA - Manual (Page 33)

VT' ''
t^^i-^rti'- - ■
Do not use the following types of documents or they may jam. Make a copy of such
documents and feed the copy into the unit.
•Paper with chemically treated surfaces such as carbon paper or carbonless
duplicating paper
•Heavily curled, creased or torn paper
• Paper with a coated surface
• Small size paper such as a slip or voucher
•Thin paper less than 45 g/m^ (12 pounds)
•Thick paper over 90 g/m^ (24 pounds)
• Paper whose contrast between the print and the background is faint
• Paper whose printing on the reverse side can be seen through from the front
(e.g. newspaper)
Remove clips, staples or other similar objects from a document before feeding it into
the unit.
Make sure that any ink or paste on the document is completely dry before feeding it
into the unit.
•A document whose length exceeds 600 mm (235/e") cannot be transmitted. When
you feed such document, the unit stops transmitting and a long beep will be heard.
If this happens, press the STOP/CLEAR button and remove the document.
•If a document is electrostatically charged, the automatic document feeder may not
function properly.
Document loading
Place the documents on the tray FACE DOWN.
After aligning the documents, adjust the document guide according to their width.
Resolution and contrast
You can set the following functions depending on the quality of an original.
Set the functions before transmission or copying. If you set them during
transmission, they will be effective from the next sheet to be transmitted.
FINE is suitable for originals written with small
characters.
Press the FINE button. The FINE indicator lights.
LIGHT ORIGINAL is useful when transmitting or
copying originals with faint writing.
Press the LIGHT ORIGINAL button. The LIGHT
ORIGINAL indicator lights.
2-2