System programming functions, Fax logo heading, Fax tx speed – Panasonic KX-F50BA User Manual
Page 62: System programming functions -3, Fax logo heading -3 fax tx speed -3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ '■ '■ - X';■ '■ ,;*/
'
■
■
V
.
"
‘
*
•
'
■
•
*
System Programming Functions
FAX LOGO HEADING
The FAX LOGO HEADING setting
ON: Your logo and telephone number are
printed on the transmitted document.
(Default)
OFF: Your logo and telephone number are
not printed.
Operation:
“I
Press the
PROGRAM
button.
The PROGFIAM indicator lights.
2
Press “#", then press “05” for the
FAX LOGO HEADING setting.
3
Press “1" or “2".
(1=ON, 2=OFF)
4
Press the
SET
button to store your
selection in memory.
5
Press the
PROGRAM
button to end
the operation.
The PROGRAM indicator goes out.
FAX TX SPEED
The FAX TRANSMISSION SPEED setting
The unit can automatically select the
optimum transmitting speed depending on
the line condition and the type of the other
facsimile unit.
9600 BPS: Maximum speed of 9600 bits
per second. (Default)
4800 BPS: Maximum speed of 4800 bits
per second. If you frequently
experience problems such as
transmission errors caused by
poor line condition, set to
“4800 BPS”.
Operation:
“I
Press the
PROGRAM
button.
The PROGRAM indicator lights.
2
Press then press “17" for the
FAX TX SPEED setting.
3
Press “1” or “2”.
(1=9600 BPS, 2=4800 BPS)
4
Press the
SET
button to store your
selection in memory.
5
Press the
PROGRAM
button to end
the operation.
The PROGRAM indicator goes out.
4-3