Recording after the messages you want to save, Press the rew and playback/ pause buttons together, Recording after the messages you want to save -11 – Panasonic KX-F50BA User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
.f..^1i 111 1^,1,,’
Recording after the messages you want to save
New incoming messages will automatically be stored after the last message. If you
want a new incoming message to be stored after the messages you want to save,
perform the following steps.
1
PtAYBACKypAUSe
^ / 1 *
* WwWiMi
Press the
PLAYBACK/PAUSE
button
to play back the tape to the end of the
messages you want to save.
Press the
PLAYBACK/PAUSE
button
again to stop the tape.
The IN USE indicator flashes.
Press the
REW
and
PLAYBACK/
PAUSE
buttons together.
New calls will be recorded after the messages
you have saved.
Note:
You can choose between two types of recording time of incoming messages. When th
unit is in the “VOX" position, the recording time is unlimited, and when in the "1 MIN"
position, the recording time is limited to 1 minute. The unit is preprogrammed to the
“VOX” position. To change the recording time, see page 4-5.
2-11