Printing reports and lists, Individual transmission report (tx report), Printing reports and lists -1 – Panasonic KX-F50BA User Manual
Page 60: Individual transmission report (tx report) -1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
--:■ /■
■■■■■ ;:<■ u.,-rT>4^r^‘
. ■ . , ■ ■
■
i * ,
■■'■'' ''■.*':':'X~'. ■■'’';i', :.'i'
Printing Reports and Lists
Individual Transmission Report (TX REPORT)
One of the following choices is available:
ON mode;
The report is always printed to let you know if the transmission is successful or not.
ERROR mode:
The report is printed only when a transmission error occurs.
OFF mode:
The report is not printed whether the transmission is successful or not. (Default)
<< TX REPORT >>
OTHER FPCSIMILE = PPNPSONIC
PPGES =
00
RESULT = NGC 03 )
Transmission error codes
Code
Description
OK
Successful transmission
NG (02)
The STOP/CLEAR button
was pressed to interrupt the
operation.
NG (03)
Document jammed or not fed
into the unit properly.
Check the paper path and try
again.
NG (04)
Transmission error. Try again.
■ Setting PRINT TX REPORT mode
“I
Press the
PROGRAM
button.
The PROGRAM indicator lights.
2
Press then press “11" for the
transmission report mode setting.
3
Press “1", "2” or “3", then press the
SET
button to store your selection in
memory.
Selection is as follows;
Press “1" to set to ON mode.
Press “2” to set to ERROR mode.
Press “3” to set to OFF mode.
4
Press the
PROGRAM
button to end
the operation.
The PROGRAM indicator goes out.
4-1