Using password transmission, Using password receiving – Panasonic Panafax UF-322 User Manual
Page 89
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

m
Using Password Transmission
To use Password Transmission, you can select PASSWORD-XMT OFF or ON for each Transmission by
following the procedure below.
1
4
5
6
Set document face down.
I^
functonj
3
SET
Dial a number by using any of following methods.
• Manual Number Dialling
• One-Touch Dialling
• Abbreviated Dialling
(For details, see page 44 to 46 ,)
DOCUMENT SET
ENTER STATION
00%
8
SELECT MODE (1-5)
ENTER NO. OR A V
4
ri
SET
\ ~T \
PASSWD-XMT=OFF
l:OFF 2:ON
1
for OFF (password is not checked)
PASSWD-XMT=OFF
I
l:OFF 2;ON
I
or
or
2
n
for ON (password is checked)
PASSWD-XMT=ON
l:OFF 2:ON
DOCUMENT SET
ENTER STATION
00%
Ex:
01
If your machine’s Transmission Password coincides with
the other station’s Transmission Password, your machine
starts sending the document.
When transmission is completed, PASSWORD-XMT
returns to standard setting (OFF or ON).
ONE-TOUCH
<01>(Station name)
Using Password Receiving
There is no additional operation required once you set the parameter following the procedure on the previous
page. The parameter, OFF or ON, cannot be selected for each reception. It is always OFF or ON until you
change the setting.
89